AliExpress Lable Printer SKADIS Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a small printer from AliExpress and wanted to mount it up on my SKADIS, so I designed a holder for it.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I bought a small printer from AliExpress and wanted to mount it up on my SKADIS, so I designed a holder for it. I also wanted it to be able to hold any extra paper/tape I have so I dont lose it, the tape I bought is 12-40mm.
There are many printers on AliExpress which share the same design, so i would think that they should be able to work on all of them.
For reference here is the printer I bought: https://www.aliexpress.com/item/1005005104049554.html?spm=a2g0o.order_list.order_list_main.100.67fd1802RI2Xx2
I used the iFixit Mako Screwdriver Mount for Ikea Skadis model as a base and built my model on top of the back of it since I was too lazy to remeasure and stuff, so other than the back part, everything else is new.
As for the Skadis Hook with Dovetail, I just put it there for the ease of use.
Feel free to support me!
