1 / 2
Prusa mk3s/mk3s+ dust cover for stock extruder — zdjęcie 1
1 / 2

Prusa mk3s/mk3s+ dust cover for stock extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple but fun dust cover to keep the filament path clean when the printer is not running.

Ocena
4,8 / 5
Polubienia
43
Pobrania
141
Wydruki
6
Wyświetlenia
1552
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I modelled this aeroplane inspired dust cover to fit the stock mk3s / mk3s+ extruder with a comfortable fit. It slides on and gets off easily aswell. It does not interfere with any cables or screws, it cannot be put on when the extruder is at max z-heigth since it interferes with the metal Frame. The pretruding tab on the underside is a spacer to protect the cable of the filament sensor.

The cover is ideally printed at a .2mm layer height, so that if you want to use a different colour for the text you can do a simple filament swap at layers 3 and 5. To strengthen the walls and shorten the print time I suggest to use 3 wall perimeters.

I added a blank version of the cover aswell so that you can add text or graphics on your own.

The provided gcodes work fine for me and include the mentioned layer swaps.

Tagi