DIY Polishing Station Modified Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra and modified parts for my build of the DIY Polishing Station.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Extra and modified parts for my build of the DIY Polishing Station. I used a Decor 12.5L Tellfresh Super storer as the basis for my version.
During my build of the original DIY Polishing Station by chiz I found my humidifier was slightly different and the STL files for the cover were corrupted so I remodelled to suit the one I had. I imagine many of them are slightly different.
Additionally I had only much smaller pogo pins available so I remodelled the mounting to accept the smaller ones. The holes are slightly undersized and should be reamed just enough to slide the pins in.
This remix includes a large base on which to mount the Decor container and house the electronics. It also includes a new LCD display housing. The base is quite large and requires a 300x300 printer to complete.
I used threaded inserts and stand-offs to mount the electronics. Getting the encoder wheel into the LCD housing is a little tricky, I had to rotate it into position and while one encoder I had fit, the other did not.