DIY Polishing Station Modified Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extra and modified parts for my build of the DIY Polishing Station.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 16
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Extra and modified parts for my build of the DIY Polishing Station. I used a Decor 12.5L Tellfresh Super storer as the basis for my version.
During my build of the original DIY Polishing Station by chiz I found my humidifier was slightly different and the STL files for the cover were corrupted so I remodelled to suit the one I had. I imagine many of them are slightly different.
Additionally I had only much smaller pogo pins available so I remodelled the mounting to accept the smaller ones. The holes are slightly undersized and should be reamed just enough to slide the pins in.
This remix includes a large base on which to mount the Decor container and house the electronics. It also includes a new LCD display housing. The base is quite large and requires a 300x300 printer to complete.
I used threaded inserts and stand-offs to mount the electronics. Getting the encoder wheel into the LCD housing is a little tricky, I had to rotate it into position and while one encoder I had fit, the other did not.