Prusa MK3S Black PSU Quick Release Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a component part of a 3D Printer enclosure project: https://www.prusaprinters.org/print/66092
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 234
- Wydruki
- 7
- Wyświetlenia
- 2074
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a component part of a 3D Printer enclosure project
This bracket is designed for the Prusa MK3S Black PSU.
The idea is to place the PSU outside of the enclosure to extend its life with an easy and quick release mechanism.
It has to be mounted on (at least 4mm) washers for ventilation and ease of use.
The mechanism is based on two screws with cylindrical head on the PSU side, wich fit in the lateral part of the bracket and two screws with nylock nuts to fit the two notches at PSU bottom.
It is easier to understand with this video.
Print Settings
Printer: Prusa I3 MK3S
Rafts: No
Supports: No
Resolution: 200
Infill: 100
Filament: Prusament Galaxy Black PETG
Category: 3D Printer Accessories