1 / 10
Spacer / Stand-off / Foot / Leg - for self-tapping screws - FreeCAD Parametric — zdjęcie 1
1 / 10

Spacer / Stand-off / Foot / Leg - for self-tapping screws - FreeCAD Parametric

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

► Versatile components with many uses. ► Fasten with low-cost self-tapping woodscrews you probably already have.

Ocena
0 / 5
Polubienia
16
Pobrania
99
Wydruki
0
Wyświetlenia
534
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Notes

■ See the diagram image for explanation of parameters.

■ Chamfer and Plinth (flange) features are added to one or both ends using the Nc and Np parameters respectively.

■ To edit parameters in FreeCAD look for the spreadsheet inside the model tree.

■ Some combinations of parameters won't work. I've put in limits which mean that one or more parameters may be unfulfilled if they'd clash. Nevertheless it's possible for the geometry to break : Look out for red exclamation marks in the model tree. 
Also a sudden large change in a parameter might cause the sketch geometry to fail. Try changing it in smaller steps if this happens, or change the parameters in a different sequence. 

■ Note that on FreeCAD, if the model fails to build then the 3D image will still show the previous ‘good’ geometry.

 

Parametric modelling on FreeCAD

I was pleasantly surprised that parametric modelling on FreeCAD works quite well. While not having the power of a full Excel spreadsheet (as SolidWorks), the common maths functions one might need are possible, and it all feels correspondingly less heavy. Referencing the parameters into dimensions is a bit more clunky, but there's an autocomplete which makes things easier.

Tagi