Spacer / Stand-off / Foot / Leg - for self-tapping screws - FreeCAD Parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
► Versatile components with many uses. ► Fasten with low-cost self-tapping woodscrews you probably already have.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 99
- Makes
- 0
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Notes
■ See the diagram image for explanation of parameters.
■ Chamfer and Plinth (flange) features are added to one or both ends using the Nc and Np parameters respectively.
■ To edit parameters in FreeCAD look for the spreadsheet inside the model tree.
■ Some combinations of parameters won't work. I've put in limits which mean that one or more parameters may be unfulfilled if they'd clash. Nevertheless it's possible for the geometry to break : Look out for red exclamation marks in the model tree.
Also a sudden large change in a parameter might cause the sketch geometry to fail. Try changing it in smaller steps if this happens, or change the parameters in a different sequence.
■ Note that on FreeCAD, if the model fails to build then the 3D image will still show the previous ‘good’ geometry.
Parametric modelling on FreeCAD
I was pleasantly surprised that parametric modelling on FreeCAD works quite well. While not having the power of a full Excel spreadsheet (as SolidWorks), the common maths functions one might need are possible, and it all feels correspondingly less heavy. Referencing the parameters into dimensions is a bit more clunky, but there's an autocomplete which makes things easier.