Particle Photon 2 Solderless Mount Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solderless mount for the Particle Photon 2 with a choice of cases
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I'm using a Photon 2 along with a Grove Ultrasonic Range Sensor to monitor the salt level in my water softener. I designed this for a quick and easy way to mount the Photon 2 to the wall.
The solderless mount can be used for quick prototyping. Wire can be inserted either from the outside or inside for a cleaner look. I incorporated a zip tie slot on the inside to firmly hold wires for strain relief.
There are two cases that are available. The cases are a friction fit over the solderless mount. Both cases have two holes on the top to access the Reset and Mode buttons (via straight pin/needle), a hole for the indicator LED, as well as two thumb slots for easier disassembly.
One case only has an opening for a micro USB cable. The other case has the USB opening as well as an opening for the JST connector.
Update: V2 of the cases have a larger thumb slot and I had to raise the case height a bit to provide more internal clearance of the plugs.