Particle Photon 2 Solderless Mount Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A solderless mount for the Particle Photon 2 with a choice of cases
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I'm using a Photon 2 along with a Grove Ultrasonic Range Sensor to monitor the salt level in my water softener. I designed this for a quick and easy way to mount the Photon 2 to the wall.
The solderless mount can be used for quick prototyping. Wire can be inserted either from the outside or inside for a cleaner look. I incorporated a zip tie slot on the inside to firmly hold wires for strain relief.
There are two cases that are available. The cases are a friction fit over the solderless mount. Both cases have two holes on the top to access the Reset and Mode buttons (via straight pin/needle), a hole for the indicator LED, as well as two thumb slots for easier disassembly.
One case only has an opening for a micro USB cable. The other case has the USB opening as well as an opening for the JST connector.
Update: V2 of the cases have a larger thumb slot and I had to raise the case height a bit to provide more internal clearance of the plugs.