Titan Aero fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5015 part cooling fan duct for Titan Aero
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 909
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Mount for Anycubic Kobra can be found here
Mount for Titan Aero can be found here
The rest of the discription and all the CG pictures are copied from the original Thingiverse
The basis of this duct is the project of the respected achmed20 (https://www.thingiverse.com/thing:3364313). The changes I made:
Reduced the height of the outlet channels, while increasing the area of the outlet openings. This is done because in my case the original design touched the thermistor from the output side of the wires, which led to the melting of the part in this place. The total area of all the outlet openings was even larger than the area of the outlet window of a standard 5015-fan. This should favorably affect the throughput of the duct, because this eliminates excessive air pressure inside the product.
I also changed the shape of the internal structures of the air channels, making them smoother, to reduce the noise level.
The parts marked on the screenshot with the numbers "1", "2" are made more durable. Now the fan 5015 is flush against the base, and the edge "2" is no longer broken off during the installation of the fan.
Thanks achmed20 for a great idea! Other elements of his mounting system I use as is.