ICE scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our car windows are not flat, so why would the ice scraper be?
- Ocena
- 4,889 / 5
- Polubienia
- 542
- Pobrania
- 2562
- Wydruki
- 35
- Wyświetlenia
- 10 424
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Car windows are not flat, so why would the frost/ ice scraper be?
Although most scrapers are 75mm-ish wide, they only scrape around 25mm of ice. This is where my research began.
I found that all car windows have some amount of a curve in their shape, this makes it so the actual contact area is much less than the supposed width that the scraper actually ‘scrapes’
Therefore, I designed this scraper, it prints entirely without support and has 17 individual compliant mechanisms that form the scraper around your window for maximum contact.
Settings;
- Layer height; 0,20mm
- Material; PETG
- Perimeters; minimal 3
- Infill 25% Cubic/Gyroid
03/12/2024; Gen 3 release!
- Made a wider version (150mm instead of 100mm)
- Made a version with longer handle (200mm instead of 125mm)
- Made the edge significantly more durable, by changing its printing geometry
- Made it more reliable to print by implementing enforcement bridges
03/12/2023; Gen 2 release!
- The new model is designed from the ground up!
It now prints and works correctly with every sheet, has a longer and more comfortable handle, a more durable blade, better printability and a sleek, minimal design.
Like my work??
Please consider donating me a coffee :)
www.buymeacoffee.com/voxel3d