ICE scraper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Our car windows are not flat, so why would the ice scraper be?
- Rating
- 4.889 / 5
- Likes
- 542
- Downloads
- 2,562
- Makes
- 35
- Views
- 10,424
- Reviews
- 27
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Car windows are not flat, so why would the frost/ ice scraper be?
Although most scrapers are 75mm-ish wide, they only scrape around 25mm of ice. This is where my research began.
I found that all car windows have some amount of a curve in their shape, this makes it so the actual contact area is much less than the supposed width that the scraper actually ‘scrapes’
Therefore, I designed this scraper, it prints entirely without support and has 17 individual compliant mechanisms that form the scraper around your window for maximum contact.
Settings;
- Layer height; 0,20mm
- Material; PETG
- Perimeters; minimal 3
- Infill 25% Cubic/Gyroid
03/12/2024; Gen 3 release!
- Made a wider version (150mm instead of 100mm)
- Made a version with longer handle (200mm instead of 125mm)
- Made the edge significantly more durable, by changing its printing geometry
- Made it more reliable to print by implementing enforcement bridges
03/12/2023; Gen 2 release!
- The new model is designed from the ground up!
It now prints and works correctly with every sheet, has a longer and more comfortable handle, a more durable blade, better printability and a sleek, minimal design.
Like my work??
Please consider donating me a coffee :)
www.buymeacoffee.com/voxel3d