Klipper 2.5" SSD Mount for Din Rail plus with Universal Mount Ideal for Sovol or Voron use with Orico SATA USB Adapter Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Run your Klipper printer from a Solid State Drive rather than a SD card!
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 137
- Wydruki
- 2
- Wyświetlenia
- 1214
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
…Please be sure to hit like & post a make, I'd love to see your prints!
Turn your Rasberry Pi equipped printer into a solid state machine! These drives are faster & more reliable than any SD card which have a very limited times they can read/write before they fail!
Don't loose your system to that, increase storage size & make it more responsive with faster storage! I bet you probably have one of these just laying around!
This model is designed for use with the PCB board from a cheap Orico 2.5" drive enclosure.
OR
Use without & use your own SATA/USB adapter.
To use with the ORICO part simply open the enclosure & pop out the plastic cover left side then right, then install the PCB onto the mount using the original screws from the case.
The version I used is model 2520C3-V1-BK with ASIN B0BM9N9VRD.
Search amazon: ORICO 2 5" Hard Drive Enclosure USB C, 6Gbps USB 3.1 Gen 1 External Enclosure 2.5 for SSD & HDD 9.5mm/7mm up to 6TB UASP Support SSD Enclosure with USB Cable, Tool-free (Black, 2520C3)
Although most of them probably share the same PCB board inside. SEE PHOTOS!
You'll need:
- 4x 12mm M3 button (dome) head bolts - for attaching the SSD to the SSD Mount
UNIVERSAL MOUNT
- x1 10-12mm M3 cap head bolt - for universal mount fixing to T-nut or frame mount.
- x1 M3 T-Nut - for V slot fixing.
OR
- x1 VHB tape or double sided foam tape for mounting inside your printer's case with no access to the underside of the drive.
- x2 M2 Self taping screws - to fix SSD Mount to Universal Mount.
NOTE>>!!!
With Universal Mounting it's best to use VHB or double sided foam tape if you're mounting the drive inside the printer's body/case - as it'll be hard to access the drive mounting bolts that are on the underside of the drive unless you can reach either side of the mounting point/V slot extrusion you are attaching the mount to.
You have been informed so please don't leave a bad review about that.
DIN RAILS
- Download this model https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl
- x2 M2 Heat inserts - to add to the above model's mounting holes
- x2 M2 cap head bolts - for attaching SSD Mount to PCB_DIN_CLIP model
PRINTING
Print 0.2mm layer height in your choice of materials.