1 / 12
Klipper 2.5" SSD Mount for Din Rail plus with Universal Mount Ideal for Sovol or Voron use with Orico SATA USB Adapter Board — image 1
1 / 12

Klipper 2.5" SSD Mount for Din Rail plus with Universal Mount Ideal for Sovol or Voron use with Orico SATA USB Adapter Board

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Run your Klipper printer from a Solid State Drive rather than a SD card!

Rating
5 / 5
Likes
20
Downloads
137
Makes
2
Views
1,224
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

…Please be sure to hit like & post a make, I'd love to see your prints!


 

Turn your Rasberry Pi equipped printer into a solid state machine! These drives are faster & more reliable than any SD card which have a very limited times they can read/write before they fail!

Don't loose your system to that, increase storage size & make it more responsive with faster storage! I bet you probably have one of these just laying around!

This model is designed for use with the PCB board from a cheap Orico 2.5" drive enclosure. 

OR

Use without & use your own SATA/USB adapter.

To use with the ORICO part simply open the enclosure & pop out the plastic cover left side then right, then install the PCB onto the mount using the original screws from the case.

The version I used is model 2520C3-V1-BK with ASIN B0BM9N9VRD.

Search amazon: ORICO 2 5" Hard Drive Enclosure USB C, 6Gbps USB 3.1 Gen 1 External Enclosure 2.5 for SSD & HDD 9.5mm/7mm up to 6TB UASP Support SSD Enclosure with USB Cable, Tool-free (Black, 2520C3)

Although most of them probably share the same PCB board inside. SEE PHOTOS!

 

You'll need:

 

  • 4x 12mm M3 button (dome) head bolts - for attaching the SSD to the SSD Mount 

 

UNIVERSAL MOUNT

  • x1 10-12mm M3 cap head bolt - for universal mount fixing to T-nut or frame mount.
  • x1 M3 T-Nut - for V slot fixing.

OR

  • x1 VHB tape or double sided foam tape for mounting inside your printer's case with no access to the underside of the drive.
  • x2 M2 Self taping screws - to fix SSD Mount to Universal Mount.

 

NOTE>>!!!

With Universal Mounting it's best to use VHB or double sided foam tape if you're mounting the drive inside the printer's body/case - as it'll be hard to access the drive mounting bolts that are on the underside of the drive unless you can reach either side of the mounting point/V slot extrusion you are attaching the mount to. 

You have been informed so please don't leave a bad review about that. 

 

DIN RAILS

 

PRINTING

Print 0.2mm layer height in your choice of materials.