1 / 5
Hanging PET bottle storage with screw holes for affixing anywhere (fits on small printers) — zdjęcie 1
1 / 5

Hanging PET bottle storage with screw holes for affixing anywhere (fits on small printers)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A hanging PET bottle organizer that can be affixed on the bottom of any shelf or cabinet using screws.

Ocena
5 / 5
Polubienia
62
Pobrania
164
Wydruki
2
Wyświetlenia
798
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

A hanging PET bottle organizer/dispenser that can be affixed to the bottom of any shelf or cabinet.
Perfect to organize your pantry.

Adapted from the Ikea Kallax version (which doesn't require any screws):

https://www.printables.com/model/662635-pet-bottle-storage-for-ikea-kallax-no-support-no-g

Prints vertically with no support required. Tested on core XY printer, but may require a wide brim on a bedslinger.

Two choices for printing:

  • Print both the “start” and “end” parts and connect them together. The parts have a cut to assist with alignment.
  • Print only the "single part" version that already included the front and the back part in a single piece.

If you need the part to be longer, it can be stretched a little on the slicer without really affecting usage or installation.

If you need it much longer, I recommend cutting a stretch of the part in the center (between the screw holes) and stretching that part. Then reconnect the stretched center with the other two parts before printing, so the screw holes won't be affected by stretching.

Screws:

Use countersunk screws with a root diameter smaller than 4mm (head smaller than 8mm) to fix the part to a shelf/cabinet.

 

STEP files included, as I always do. Feel free to edit, remix and share anywhere, but please share with attribution!

Tagi