1 / 2
PubParts Onewheel GT40 Fender Plug Protector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your GT40 from coming unplugged from the fender port!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Keep your GT40 from coming unplugged from the fender port! Use an M4x12 screw in the place of the existing fender screw to keep this nicely attached to the board. No more chance for it to come unplugged while you're out shredding.
Added a turbo text version in case you want to let your friends know what's running under the hood. 😉
Printing Instructions
- Print as the model lies, with supports. I would also recommend a brim to support the models and keep them from warping while printing.
- Take ‘em off your print bed when they’re done and remove the supports.
- Install on your board. It should fit right over the standard plug location and accept an M4x12 countersunk screw to keep it in place using the nearby fender screw hole.