Strymon Mid-sized Pedalboard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches to the bottom of a Strymon mid-sized pedalboard (blueSky tested) using the factory screws.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Attaches to the bottom of a Strymon mid-sized pedalboard (blueSky tested) using the factory screws. This version has two tabs on the side for M4 screws for attaching to a 2020 extrusion pedalboard I designed. Velco could also be attached to the bottom of the adapter plate to avoid sticking velcro to the pedal itself.
Model comes with the Strymon logo visible on the bottom of the pedal so it's easy to tell what pedal this adapter plate fits. I followed Strymon's Brand Assets Use Guide available here. The logo is setup to print in a second color, if desired.
This model was printed in PETG (because that's what I use). PLA would be fine too.