3018 SainSmart Dust Shoe Adapter to 500W Spindle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the SainSmart dust shoe to the larger Daedalus 500W spindle (57mm bottom cap)
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I upgraded my 3018 spindle motor to one of the widely available uprated spindles, but still wanted to use the clear magnetic SainSmart dust shoe. Cue an afternoon in Fusion and I'd knocked up a simple adapter.
The magnets should just press-fit in – just test them with the rest of the dust shoe and mark them so they're the right way around.
Printed on a Bambu P1-S with the settings below.
Other items needed:
10mm x 3mm magnets x2
Large hose clip or similar to clamp it on the spindle
Print settings:
Filament: PETG
Layers: 0.2mm
Supports: Yes
Infill: 100%