1 / 2
Noctua NA-FC1 Mounting Plate — zdjęcie 1
1 / 2

Noctua NA-FC1 Mounting Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

mounting plate for the Noctua NA-FC1 Fan controller which has room for four controller including cable attachment

Ocena
0 / 5
Polubienia
3
Pobrania
37
Wydruki
0
Wyświetlenia
647
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If a velcro is not enough or you need to keep the fan control on one place like me.

Quick and fast design of a mounting plate for the Noctua NA-FC1 Fan controller which has room for four NA-FC1 including the possibility to fix the cable with zip ties (sadly the cables are getting detached very easy and noctua has no mounting option - so with that both topics are fixed. Additive there are some mounting holes for M4 (aligned for a 4040/8040 Profile extrusions and two M6 holes in the middle of the plate. 

Remixed:

@TRob_38939 Noctua PWM fan controller DIN mount made it a little bit bigger and removed the drillholes.

@Steven Zip tie clip fixed the half of the clip on the plate without the drillholes in center alignement of the controller mounts 

Printed in ABSx from Nobufil candy smoke grey

use supports only on the controller mounts and not on the zip ties!

hint: remove all of the supports :-)

Tagi