1 / 34
MinionD Ender 3 Dual duct | 12gr | stock hardware — zdjęcie 1
1 / 34

MinionD Ender 3 Dual duct | 12gr | stock hardware

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MinionD Ender 3 / PRO / v2 dual duct 12gr | stock hardware With the existent hardware, this dual duct mount is…

Ocena
4,778 / 5
Polubienia
89
Pobrania
542
Wydruki
20
Wyświetlenia
3569
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

MinionD Ender 3 / PRO / v2 dual duct

12gr | stock hardware

With the existent hardware, this dual duct mount is intended to replace the stock one, improve part cooling, air flow...

Easy to print, mount and do some maintenance ;)

After a lot of tries with different designs... I decided to make this one, with some improvements:

  • uses Ender 3 / Pro /v2 stock hardware
  • 12gr without screws
  • increase bottom shield to avoid air flow from the main hotend fan reaching the nozzle
  • a simple but effective cable strain relief
  • thickening of the outside ducts walls MinionD Ender 3 dual duct air flow test:
    https://youtu.be/2JOf3tFQ6s4

I´ve included some cut stl´s of v2 fixed and v3 to print and check fit, before printing the actual mount.

Updates and fixes based on comments and suggestions, thanks ;)
19/04/201 - v3 pressFit

  • with the updates & fixes from v3
  • the blower fan can now be mounting without screws
    • step included

19/04/201 - v3

  • with the updates & fixes from v2
  • added some small rear exhausts vents

19/04/201 - v2 fixed & adjustable

  • minor model fixes
  • adjustable screw holes for the 4010 blower

10/04/201 - vanes version + step

  • v2 - added inlet guide vanes as requested
  • mounting screws still accessible
  • uploaded STEP file, happy remix :) 08/04/201 - BLTouch mount

  • print in PLA

  • easy print, no supports
  • offset, pls check images 07/04/201 - ABL mount
    18mm inductive sensor

  • printed in PLA at 0.2 / 30% infill

  • easy print, no supports
  • to set up offset, pls check images » discord: https://discord.gg/k3GvDAgNEb

Remix based on this amazing design "Mini-Me v4 lightweight Ender3 Hotend Duct..." - https://www.thingiverse.com/thing:4375296

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20

Filament: Tucab PETG any
Notes:

MinionD dual duct

  • printed in PETG
  • print orientation like in supplied image.
  • supports are needed, i´ve used Cura tree supports - Touching buildplate only ABL mount

  • printed in PLA

  • no supports BLTouch mount

  • printed in PLA

  • no supports

Category: 3D Printer Parts

Tagi