Unifi Protect G3 Instant - 25 degree angled stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angled stand for the Unifi Protect G3 camera, that does not need to be wall mounted but camera can just stand on.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 227
- Wydruki
- 5
- Wyświetlenia
- 1472
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One of my Unifi Protect G3 Instant camera is standing on a high cabine but needed a bit of a down angle (25 degrees) to get a better picture of the whole room.
Unfortunately, the default camera can only stand straight up, or needs to be wall mounted if you want adjusted angles.
So I designed a basic stand that fits the camera nicely in a 25 degree angle and has a slot for the camera cable. The latter also functions an additional hold for the camera so it does not accidently tip over.
Print instructions:
Material: PLA should be fine or PETG if in a high UV spot
Layer height: 0.2 mm
Supports: No
Infill: 10-15% is enough