Unifi Protect G3 Instant - 25 degree angled stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An angled stand for the Unifi Protect G3 camera, that does not need to be wall mounted but camera can just stand on.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 227
- Makes
- 5
- Views
- 1,472
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
One of my Unifi Protect G3 Instant camera is standing on a high cabine but needed a bit of a down angle (25 degrees) to get a better picture of the whole room.
Unfortunately, the default camera can only stand straight up, or needs to be wall mounted if you want adjusted angles.
So I designed a basic stand that fits the camera nicely in a 25 degree angle and has a slot for the camera cable. The latter also functions an additional hold for the camera so it does not accidently tip over.
Print instructions:
Material: PLA should be fine or PETG if in a high UV spot
Layer height: 0.2 mm
Supports: No
Infill: 10-15% is enough