Nokia Modem G-2425G-B Wall mount (Double-sided tape)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple model for mounting Nokia Modem G-2425G-B to the wall without drilling the wall.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 916
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Instructions
1- Uses the screws (4mm wood screw might work as well) that came with Modem, tighten the screws to the holes on the model and leave some space to allow installing and removing the modem.
2- then use a QUALITY double-sided tape i recommend 3M VHB or something similar like Scotch-Mount Extreme Double-Sided Mounting Tape.
3- the surface need to be cleaned on either sides with Isopropyl to remove grease and oils for better and strong adhere.
Print Settings
Printer: Creality CR-10 Smart
Rafts: Brim (If there is lifting or warping on corners)
Supports: No
Resolution: 0.2~0.3
Infill: 15 or more
Filament brand: CC3D
Filament color: Black
Filament material: PLA+
- Notes:
If there is lifting (warping) on the corners then enable brim.