PVC Live/Dry Fire Target Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Target stand with accessories for using in live and dry fire, as well as transporting.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 1423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
T-Stand
You can use one by itself as a dry fire target stand or use two in a pair as a live fire target stand. Uses ½" PVC as legs and uprights.
You need good bed adhesion so the skinny isolated part stays in place until the two pieces meet. I recommend printing in PETG for this reason.
Additionally, for outdoor use, I recommend printing in white filament, especially white PETG. In direct sunlight, darker filaments can reach heat deflection temperature and droop.
Has holes for staking which you will probably want to use in live fire since the bases are so lightweight and can rotate independently of each other.
Y-Stand
Similar to the T-stand but easier to use standalone for dry fire. Takes three short pieces of PVC as legs instead of two long ones.
PVC Target Holder - Dry Fire
Clips to a piece of ½" PVC and holds a single BSPS thickness scaled dry fire target from below.
PVC Target Holder - Live Fire
Clips to a piece of ½" PVC and holds a regular thickness target from the side.
PVC Clip - Single
Used for holding 4 pieces of ½" PVC together. I use this to hold my 4 live fire target stands in a stack for carrying around.
PVC Clip - Double
Used for holding 8 pieces of ½" PVC together. I use this to hold the uprights that go with my 4 live fire target stands for carrying around.