Liczymy pasujące modele…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
This is my personal design for the Klipsch R-41M speaker. After an exhausting search of the web and not finding anything to my liking I decided to make it myself. I wanted something that would be strong, hide the wires and minimalist in…
A simple, low-profile wall mount for Klipsch remote controls. Perfect for keeping your remote accessible and organized. 4mm countersunk holes for plaster screws. Print Instructions Material: Printed in ASA-CF . Layer Height: 0.2 mm.…
This is a mounting plate that allows for a replacement PSU to fit in the original PCB location. The original power supply was much larger than an aftermarket PSU. This part is designed for the Noyito AC-DC PSU as discussed on the Klipsch…
Klipsch ProMedia 2.1 Under-Desk Volume Mount Remix, smaller than the OG
I've created this model for having my Klipsch remote always available in my IKEA SKADIS pegboard and not lost it in the mess of my workspace. The holes are for fitting the Skadis using this screws by: @Arough_296617
These are 1/6th scale IPSC target models meant for use in your dryfiring training. Every model has within it several 6mmx2mm magnet pockets which allows you to easily configure your target to the presentation you want. The pockets are…
This is a speaker corner wall mount for Klipsch RP 140 SA. I used PETG with 2 perimeter.
This remote holder has a slot for a AppleTV 4K remote and a slot for a Klipsch bookshelf speaker remote. There is a third slot that just happened to be the area left over in the design. I plan to make another version without the third…
Klipsch promedia 2.1 speaker mount for this system. Need x2 M5x6x7 heated inserts Used the larger mounting system with 2 holes holder 2 hex - d30 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway.…
Full credit goes to @benoit_955624. This is a remix of one of their parts - https://www.printables.com/model/983715-angle-bracket-for-sony-ht-mt301-soundbar Angle bracket for the Klipsch Flexus Core 100 soundbar to orient the soundbar…
I bought a set of Klipsch speakers for my desk. Since everything on my desk is pole mounted, I needed a way to mount my speakers. I found an existing file so I remixed it. Since the original designer was kind enough to provide the step…
This is a dispenser designed for 2000 piece 20mm patch rolls made by Eemann Tech. Clearance of 0,2mm for all parts except the locking surfaces which have 0mm tolerance. Would recommend using PETG or ABS/ASA for locking tab durability over…
The Mini-IPSC Target Template! Use shortened, sharpened nails in the holes to mark the vertices of each target zone (A zone, B zone, C, zone, etc) and trace the outside perimeter! Once finished and without letting the template move any,…
The dust caps on all of my Quintet IIs began to rot, so I looked for a hollow sphere and rescaled it. Perfect dustcap. Printed in PLA, flat. I used rafts but it likely won't be necessary for this print. Print Settings Printer Brand:…
post a pic when your done! 1、模型仅为皮肤mod，替换原版模型中的主要外型部件使用。要制作完成需要依赖原版模型文件。 2、需要在切片软件中拆分后再摆盘打印。 3、在原版模型的五金配件基础上需要替换或者新增的配件如下： 更换：3.0直径圆柱销长度32mm*1 更换：M5外径6长度35mm对锁螺丝*1套 更换：m3沉头螺丝，长度16mm*4颗 新增：m1机瞄光纤，7mm*1根，47mm*2根…
This is an angled wall mount for the Klipsch R41M speakers (and possibly others) The angle is 34 degrees.
This 3D-printed ClipScoop combines two everyday essentials in one smart tool: a 30 ml coffee scoop and a bag clip to keep your coffee fresh and sealed. Perfect for coffee lovers, baristas, or anyone who enjoys an organized kitchen. Simply…
Target Stand for USPSA/IPSC/PCSL/IDPA Target stand for 1in x 2in sticks and split in two pieces to fit on the X1/P1 build plate. If using outside, it is recommended to print in PETG. The two pieces are held together with two wedges…
IPSC-Logo as multi-material print with three embedded 8mm x 3mm magnets on the backside. Fusion 360 file is included. The logo design is the intellectual property of the copyright and/or trademark holder. Category: Sport & Outdoors
Speaker mount for the Klipsch Pro Media 2.1 also works with other small satellite with a M5 mouting thread on the bottom. Fit is a bit tight on some printers, may want to scale down slightly Printed in PETG @ 0.20 layer height. Print with…
This is a mount designed for the volume audio module for the Klipsh Promedia 2.1 speaker set. I wanted to mount my speakers on the wall but if they are mounted on the wall, the volume module ends up in the air… so I removed it from the…
So my clumsy ass (literally) broke off the original RCA connectors. Seeing as how expensive the set was and how the entire model is discontinued, I did not want to replace the subwoofer. Instead, I created a thing to hold the cables in…
A simple 1:10 model of the Klipsch Reference R-101SW subwoofer.
Klipsch ProMedia 2.1 Speaker Wall Mount. Small profile, single screw mounting option. It has a little nub that digs in to the drywall to prevent rotation. Print in the orientation shown on the photo. No supports needed.
4 or 3 parts in total: body, cover, screw and wrench (wrench is optional). Any plastic of your choice. Minimum supports (locally on cover and key). Shooting Stickers: https://aliexpress.ru/item/1005008518087267.html More information on my…
Original https://www.thingiverse.com/thing:5356923 These are the seperated files. MM files no longer have color change.
This is my personal design for the Klipsch R-41M speaker. After an exhausting search of the web and not finding anything to my liking I decided to make it myself. I wanted something that would be strong, hide the wires and minimalist in…
Patch dispenser for roll of patches commonly used in Czech republic as well as parts of Slovakia and Poland (and perhaps other regions) Rolls are about 93mm outer diameter and 39mm inner diameter. 19mm in patches diameter. The lid is…
I wanted to mount my old Klipsch BAR48 soundbar above my LG 55Sk8000 TV. Other mounts were either too big or too small. This worked perfectly. Do note, personally, I have the sound bar free floating above the TV, while it feels fairly…
What is it ? This is an IPSC competition shooting belt adapter for affordable Cytac brand F-Speeder series of holsters. EDIT 11.4.2022: Added a Tri-Spacer that you can use instead of the regular holster spacers Different files Laser-cut…
A simple, low-profile wall mount for Klipsch remote controls. Perfect for keeping your remote accessible and organized. 4mm countersunk holes for plaster screws. Print Instructions Material: Printed in ASA-CF . Layer Height: 0.2 mm.…
This is a mounting plate that allows for a replacement PSU to fit in the original PCB location. The original power supply was much larger than an aftermarket PSU. This part is designed for the Noyito AC-DC PSU as discussed on the Klipsch…
Klipsch ProMedia 2.1 Under-Desk Volume Mount Remix, smaller than the OG
I've created this model for having my Klipsch remote always available in my IKEA SKADIS pegboard and not lost it in the mess of my workspace. The holes are for fitting the Skadis using this screws by: @Arough_296617
These are 1/6th scale IPSC target models meant for use in your dryfiring training. Every model has within it several 6mmx2mm magnet pockets which allows you to easily configure your target to the presentation you want. The pockets are…
This is a speaker corner wall mount for Klipsch RP 140 SA. I used PETG with 2 perimeter.
Assumed it was originally made of 0.125'' sheet metal but made assumption on that
Here is a basic IPSC logo, with colours separated by heights, so you can print them with filament swapping to get it printed correctly. I have made this kind of designs into patches for my range bag and such. Category: Sport & Outdoors…
Hacked together the speaker mount from FredRaket's design with the wall mount from RadioactiveLeek to create a more flexible wall mount for the Klipsch Pro Media 2.1 speakers that I have as they are above my monitors and I wanted to be…
I designed some parts for DIY Klipsch-style speakers. I got inspired by the RP-600M speakers. Design Speaker Horn (2-part) designed for Peerless D19TD05-08 Tweeter, but may fit others. 6.5" Woofer "FR-65YL-M" from aliexpress. Woofer Trim…
A work in progress. This set is made to a 1-36 scale based on IDPA and IPSC targets and designed so you can lay out a course or event on 1x1 inch grid paper where 1 inch = 1 yard. I designed it for a 0.4mm nozzle and 0.2mm layer height…
This is an IPSC Standard Box, with the inner Dimensions of 226x151x46mm (so including the 1mm tolerance. For some reason the thumbnail is a bit smushed, that's just thingiverse. It is the correct dimension. I've had to fiddle around with…
Designed in need to hold a magnet on an IPSC outer belt. It's used to hold full ammo magazines when used in IPSC shooting. It consists of 2 parts to hold on the belt as shown in pictures. To assemble you need 4 M4 nuts and M4x16 bolts. I…
A way to mount your Klipsh speaker remote to anything magnetic or just to have somewhere to put it. Uses two 8 X 3 mm magnets inset, I used super glue to keep them in and it has lasted for years at this point. Excuse the terrible job I…
Adjustable magazine carriers for USPSA/IPSC belt rigs. Mounting to a TekLok-compatible clip (consider the PipClip, also in my designs, for a printable option), they can be adjusted for camber and toe, to allow tuning of wrist and arm…
Recommend printing with 50% infill to provide plenty of strength to hold speaker. Mounting Instructions: Remove the set screw that attaches the original metal stand from the base of the speaker. You will use the set screw from the…
Shell holder for an option 1 initial load (9 shells) for IPSC competition matches. This stops the need to carry your starting shells in your actual caddy, and you don't ever lose count of the shells in the gun when starting your course of…
This is a leg for a klipsch speaker, you may have to make new holes in the bottom of the speaker they might be a few millimeters smaller than the factory legs
Updated 2017feb07: v1.0.1 fixes some calcs that prevented increasing mount tab beefiness, plus beefed it up from 3mm to 4.3mm just to be sure (plastic is cheap !). v1.0.0 models are still there for comparison but suggest to just go for…
Diffirent sizes to fulfill your needs. Al the sizes are good for dryfire practice. The smaller ones are good for building micro stages for stage design. Smaller sizes also great to simulate greater distances.
A stand to show of you are proud of your Klipsch gear. Can be printed separate to do a color swap, parts can be CA glued but might not need it. I have included the files i used if you want to do a variantion on this. Be loud and proud! If…
Glow in dark IPCS targets, great for indoor and outdoor practice. You can use them in dark or in standard condition even in rain and snow :') When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at…
We all know it: We do our weekly grocery shopping, forgot a shopping cart chip and do not have any suitable coins. This shopping cart chip is combined with a key fob so you always carry it with you (as long as you don't forget your keys…
3D model of International Practical Shooting Confederation (I.P.S.C.) emblem / logo. Various size versions of the emblem are available: 75 x 92 mm 100 x 122 mm 120 x 147 mm 150 x 184 mm The provided 3MF files contain all parts (STL…
When doing dry fire practice, you need something to aim at. This simulates a full size plate at a distance for use in training environments with limited space. Best printed in dark gray to simulate real plates, or red for no-shoots. Print…
This is a tape dispenser for tape with patches for IPSC targets. It can hold a tape 23mm with 1000 patches 20 mm in diameter. The hook must be glued on the back. The screw can be unscrewed with coin €1, €2 or 50 cents. It has an opening…
I realize that this is pretty niche, but hey, that's why you're here, right? :) I wasn't a big fan of the stock wood ‘foot ring' that the Sixes have: When the speakers are really making sound, the hard wood foot may damage the surface of…
Simple container for the Klipsch speaker remote that fits the honeycomb storage wall system.
The mount is simple to print on its side without any supports. A ¼"-20 x ½" socket head cap screw is used to fix the speaker to the mount. There are counter sinks for the wall screws, sized for #6 drywall screws. A STEP file is included…
Klipsch ProMedia 2.1 Speaker Mount For Ikea Linnmon / Adils desk . -Print With Supports
I needed to find a way to suspend my Klipsch R52C center channel speaker from my fireplace mantle. The speaker was too tall to simply set on top.. so this was my quick solution. Built in Autodesk Fusion360. The original CAD file is…
Limit the magazine capacity of a CZ 75 SP-01 Shadow from 18 to 15 shots to easier comply with IPSC production rules. Will probably work on most similar guns. Attaches to the magazine spring.
You may have to make new holes in the bottom of the speaker. They might be a few millimeters smaller than the factory legs
Best printed with TPU. You can adapt the infill percentage to the stiffness of your material. When using material softer than 98A shore hardness, I recommend using the shorter flag. Otherwise it will bend during printing and start messing…
(4) M3 x 4mm x 5mm inserts (4) M3 x 12mm screws (1) 25mm magnet, 4mm mounting screw. I went with a covered ~30lb strength
My 5-year-old Klipsch speaker woofer trim ring was disintegrating I emailed the local distributor for Klipsch, and they ghosted me. So decided to design this my own to replace that. To install per speaker Print 1 trim ring Print 12 dowel.…
Enhance your audio experience with this custom-designed speaker stand tailored for the Klipsch KD-51M speakers, featuring a bottom dimension of 150mm x 230mm. Notably, it's also compatible with the Jamo S803 and other speakers with…
Wall mount for Klipsch Soundbar (used on RSB-8, but might fit other models).
Wanted to paint my own targets instead of buying some when I have cardboard laying around everywhere. I used IPSC / USPSA Targets measurements. Yes, there is only the A and C boxes. But, I figured if I am in the D boxes, I need more range…
IPSC Patch Dispenser Remixed to dispense 25mm or 1 inch patches. Example prints done in ASA.
This IPSC target is a throphy we handed out for an IPSC competition match. I've used a spring from a clothes peg to make the plate springloaded, only the spring is a bit to strong for my liking, so I added holes in the base so you can…
Klipsch Cinema 700 & 800 extension to 65" TV As the length of the soundbar is for 55" TV, it looks not so good if you have any bigger screen. Upgraded to look like Cinema 800 with real horn speakers on the end. Here is a version that…
Klipsch Cinema 700 & 800 extension to 65" TV As the length of the soundbar is for 55" TV, it looks not so good if you have any bigger screen. Here is a version that extends the soundbar to 65" OLED TV (original TV length is 145cm) On…
We designed a custom measurement boxes according to the rulebooks with 7.5mm thick walls for increased durability. Actual internal dimensions of the 3D model (tolerance included) 226mm x 151mm x 46mm Rulebook internal dimensions 225mm x…
Adapter to mount Klipsch ProMedia 2.1 speakers https://www.klipsch.com/products/promedia-2-1-bluetooth onto vertical stands https://www.amazon.com/dp/B000289DC6 (the older ~2017 model). Use M3 screws (6mm) and hex nuts to attach it to the…
A relatively simple stand but works perfect for my PC desk setup. I printed using Prusament PETG Carbon Fiber it's an absolute great match with the overall look and feel of the speaker. I assembled everthing with countersunk m3 screws and…
Adapter board to mate the Amazon Power supply board below to the OEM mount holes. Requires 4 M4 screws. Power supply link: https://www.amazon.com/dp/B07GWCPTQB?psc=1&ref=ppx_yo2ov_dt_b_product_details
Scalable IPSC targets with stands for dryfire practice. Print multiple targets scaled according to your needs along their x- & y-axes and place them around to practive dryfire on. Get the best results by printing “large” models for…
Klipsch Cinema 1200 raiser holder legs... When standing on a shelf over a TV, to be aimed at a perfect angle to the listener, 4cm high. Pinted 3 pices with theese settings: 0.24mm layer, 3 walls, tops and bottoms 15% infill adoptive cubic…
