Adapter plate to drive Klipsch SPL-120 subwoofer with Dayton Audio SPA300-D amplifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make the smaller SPA300-D amplifier plate fit into the cut-out for the Klipsch SPL-120 amplifier plate on the subwoofer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
I designed this piece in FreeCAD to fit a new Dayton Audio SPA300-D amplifier into the subwoofer box of my Klipsch SPL-120, after the original amplifier died and I couldn't find an original amp replacement to buy.
Printed in two overlapping pieces, because it's too large for my printer's bed.
Attachment to the subwoofer's wood box uses the same screws that held the original amplifier plate in place.
The new amplifier is attached to the printed adapter plate using heat fit inserts for M3 threads, and 6mm long M3 screws (The 4mm holes in the attached mesh worked fine for inserting 8mm long M3 heat inserts. Adjust the FreeCAD file as needed by changing the thread_insert_D parameter in the "Dimensions" spreadsheet.
The FreeCAD file that's attached includes the adapter plate as one single piece. I used the body named "Slicer to split part in two" to slice it into two parts (the red part in the attached screenshot.) The meshes of these two parts are attached. They are the ones I printed in PLA, and it worked for me.
Hardware list
12 Metric Heat Set Insert M3-6 (from a set I bought https://www.amazon.com/dp/B0CLKDPN65 )
12 M3-8 screws
screws that had attached SPL-120 to the subwoofer box