1 / 4
Adapter plate to drive Klipsch SPL-120 subwoofer with Dayton Audio SPA300-D amplifier — image 1
1 / 4

Adapter plate to drive Klipsch SPL-120 subwoofer with Dayton Audio SPA300-D amplifier

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Make the smaller SPA300-D amplifier plate fit into the cut-out for the Klipsch SPL-120 amplifier plate on the subwoofer.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Public Domain

I designed this piece in FreeCAD to fit a new Dayton Audio SPA300-D amplifier into the subwoofer box of my Klipsch SPL-120, after the original amplifier died and I couldn't find an original amp replacement to buy.

Printed in two overlapping pieces, because it's too large for my printer's bed.

Attachment to the subwoofer's wood box uses the same screws that held the original amplifier plate in place. 

The new amplifier is attached to the printed adapter plate using heat fit inserts for M3 threads, and 6mm long M3 screws (The 4mm holes in the attached mesh worked fine for inserting 8mm long M3 heat inserts. Adjust the FreeCAD file as needed by changing the thread_insert_D parameter in the "Dimensions" spreadsheet. 

The FreeCAD file that's attached includes the adapter plate as one single piece. I used the body named "Slicer to split part in two" to slice it into two parts (the red part in the attached screenshot.) The meshes of these two parts are attached. They are the ones I printed in PLA, and it worked for me.

Hardware list

Tags