SPEAKER HORN FOR KLIPSCH CINEMA 700 & 800 EXTENSION TO 65" TV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SPEAKER HORN FOR KLIPSCH CINEMA 700 & 800 EXTENSION TO 65" TV
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Klipsch Cinema 700 & 800 extension to 65" TV
As the length of the soundbar is for 55" TV, it looks not so good if you have any bigger screen.
Upgraded to look like Cinema 800 with real horn speakers on the end.
Here is a version that extends the soundbar to 65" OLED TV (original TV length is 145cm)
On request it can be modified to fit all other version, up to 100"
3D PRINTING SETTINGS
Standard PLA
2 walls, 2mm tops & bottoms in 0.2mm layer
5% infill is enough, but you can use more and support under angle of 10deg (to build support inside the speaker)
brim on demand (or use glue)
My print:
PLA-Tough
3 walls, 2mm tops & bottoms in 0.16mm layer
10% infill and support under angle of 10deg (to build support inside the speaker)
glue was used on a plate