Liczymy pasujące modele…
This is my personal design for the Klipsch R-41M speaker. After an exhausting search of the web and not finding anything to my liking I decided to make it myself. I wanted something that would be strong, hide the wires and minimalist in…
This is my personal design for the Klipsch R-41M speaker. After an exhausting search of the web and not finding anything to my liking I decided to make it myself. I wanted something that would be strong, hide the wires and minimalist in…
A simple, low-profile wall mount for Klipsch remote controls. Perfect for keeping your remote accessible and organized. 4mm countersunk holes for plaster screws. Print Instructions Material: Printed in ASA-CF . Layer Height: 0.2 mm.…
This is a mounting plate that allows for a replacement PSU to fit in the original PCB location. The original power supply was much larger than an aftermarket PSU. This part is designed for the Noyito AC-DC PSU as discussed on the Klipsch…
Klipsch ProMedia 2.1 Under-Desk Volume Mount Remix, smaller than the OG
I've created this model for having my Klipsch remote always available in my IKEA SKADIS pegboard and not lost it in the mess of my workspace. The holes are for fitting the Skadis using this screws by: @Arough_296617
This is a speaker corner wall mount for Klipsch RP 140 SA. I used PETG with 2 perimeter.
This remote holder has a slot for a AppleTV 4K remote and a slot for a Klipsch bookshelf speaker remote. There is a third slot that just happened to be the area left over in the design. I plan to make another version without the third…
Klipsch promedia 2.1 speaker mount for this system. Need x2 M5x6x7 heated inserts Used the larger mounting system with 2 holes holder 2 hex - d30 please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway.…
Full credit goes to @benoit_955624. This is a remix of one of their parts - https://www.printables.com/model/983715-angle-bracket-for-sony-ht-mt301-soundbar Angle bracket for the Klipsch Flexus Core 100 soundbar to orient the soundbar…
I bought a set of Klipsch speakers for my desk. Since everything on my desk is pole mounted, I needed a way to mount my speakers. I found an existing file so I remixed it. Since the original designer was kind enough to provide the step…
The dust caps on all of my Quintet IIs began to rot, so I looked for a hollow sphere and rescaled it. Perfect dustcap. Printed in PLA, flat. I used rafts but it likely won't be necessary for this print. Print Settings Printer Brand:…
This is an angled wall mount for the Klipsch R41M speakers (and possibly others) The angle is 34 degrees.
Speaker mount for the Klipsch Pro Media 2.1 also works with other small satellite with a M5 mouting thread on the bottom. Fit is a bit tight on some printers, may want to scale down slightly Printed in PETG @ 0.20 layer height. Print with…
This is a mount designed for the volume audio module for the Klipsh Promedia 2.1 speaker set. I wanted to mount my speakers on the wall but if they are mounted on the wall, the volume module ends up in the air… so I removed it from the…
So my clumsy ass (literally) broke off the original RCA connectors. Seeing as how expensive the set was and how the entire model is discontinued, I did not want to replace the subwoofer. Instead, I created a thing to hold the cables in…
A simple 1:10 model of the Klipsch Reference R-101SW subwoofer.
Klipsch ProMedia 2.1 Speaker Wall Mount. Small profile, single screw mounting option. It has a little nub that digs in to the drywall to prevent rotation. Print in the orientation shown on the photo. No supports needed.
I wanted to mount my old Klipsch BAR48 soundbar above my LG 55Sk8000 TV. Other mounts were either too big or too small. This worked perfectly. Do note, personally, I have the sound bar free floating above the TV, while it feels fairly…
A simple, low-profile wall mount for Klipsch remote controls. Perfect for keeping your remote accessible and organized. 4mm countersunk holes for plaster screws. Print Instructions Material: Printed in ASA-CF . Layer Height: 0.2 mm.…
This is a mounting plate that allows for a replacement PSU to fit in the original PCB location. The original power supply was much larger than an aftermarket PSU. This part is designed for the Noyito AC-DC PSU as discussed on the Klipsch…
Klipsch ProMedia 2.1 Under-Desk Volume Mount Remix, smaller than the OG
I've created this model for having my Klipsch remote always available in my IKEA SKADIS pegboard and not lost it in the mess of my workspace. The holes are for fitting the Skadis using this screws by: @Arough_296617
This is a speaker corner wall mount for Klipsch RP 140 SA. I used PETG with 2 perimeter.
Assumed it was originally made of 0.125'' sheet metal but made assumption on that
Hacked together the speaker mount from FredRaket's design with the wall mount from RadioactiveLeek to create a more flexible wall mount for the Klipsch Pro Media 2.1 speakers that I have as they are above my monitors and I wanted to be…
I designed some parts for DIY Klipsch-style speakers. I got inspired by the RP-600M speakers. Design Speaker Horn (2-part) designed for Peerless D19TD05-08 Tweeter, but may fit others. 6.5" Woofer "FR-65YL-M" from aliexpress. Woofer Trim…
A way to mount your Klipsh speaker remote to anything magnetic or just to have somewhere to put it. Uses two 8 X 3 mm magnets inset, I used super glue to keep them in and it has lasted for years at this point. Excuse the terrible job I…
Recommend printing with 50% infill to provide plenty of strength to hold speaker. Mounting Instructions: Remove the set screw that attaches the original metal stand from the base of the speaker. You will use the set screw from the…
This is a leg for a klipsch speaker, you may have to make new holes in the bottom of the speaker they might be a few millimeters smaller than the factory legs
Updated 2017feb07: v1.0.1 fixes some calcs that prevented increasing mount tab beefiness, plus beefed it up from 3mm to 4.3mm just to be sure (plastic is cheap !). v1.0.0 models are still there for comparison but suggest to just go for…
A stand to show of you are proud of your Klipsch gear. Can be printed separate to do a color swap, parts can be CA glued but might not need it. I have included the files i used if you want to do a variantion on this. Be loud and proud! If…
I realize that this is pretty niche, but hey, that's why you're here, right? :) I wasn't a big fan of the stock wood ‘foot ring' that the Sixes have: When the speakers are really making sound, the hard wood foot may damage the surface of…
Simple container for the Klipsch speaker remote that fits the honeycomb storage wall system.
The mount is simple to print on its side without any supports. A ¼"-20 x ½" socket head cap screw is used to fix the speaker to the mount. There are counter sinks for the wall screws, sized for #6 drywall screws. A STEP file is included…
Klipsch ProMedia 2.1 Speaker Mount For Ikea Linnmon / Adils desk . -Print With Supports
I needed to find a way to suspend my Klipsch R52C center channel speaker from my fireplace mantle. The speaker was too tall to simply set on top.. so this was my quick solution. Built in Autodesk Fusion360. The original CAD file is…
You may have to make new holes in the bottom of the speaker. They might be a few millimeters smaller than the factory legs
My 5-year-old Klipsch speaker woofer trim ring was disintegrating I emailed the local distributor for Klipsch, and they ghosted me. So decided to design this my own to replace that. To install per speaker Print 1 trim ring Print 12 dowel.…
Enhance your audio experience with this custom-designed speaker stand tailored for the Klipsch KD-51M speakers, featuring a bottom dimension of 150mm x 230mm. Notably, it's also compatible with the Jamo S803 and other speakers with…
Wall mount for Klipsch Soundbar (used on RSB-8, but might fit other models).
Klipsch Cinema 700 & 800 extension to 65" TV As the length of the soundbar is for 55" TV, it looks not so good if you have any bigger screen. Upgraded to look like Cinema 800 with real horn speakers on the end. Here is a version that…
Klipsch Cinema 700 & 800 extension to 65" TV As the length of the soundbar is for 55" TV, it looks not so good if you have any bigger screen. Here is a version that extends the soundbar to 65" OLED TV (original TV length is 145cm) On…
Adapter to mount Klipsch ProMedia 2.1 speakers https://www.klipsch.com/products/promedia-2-1-bluetooth onto vertical stands https://www.amazon.com/dp/B000289DC6 (the older ~2017 model). Use M3 screws (6mm) and hex nuts to attach it to the…
A relatively simple stand but works perfect for my PC desk setup. I printed using Prusament PETG Carbon Fiber it's an absolute great match with the overall look and feel of the speaker. I assembled everthing with countersunk m3 screws and…
Adapter board to mate the Amazon Power supply board below to the OEM mount holes. Requires 4 M4 screws. Power supply link: https://www.amazon.com/dp/B07GWCPTQB?psc=1&ref=ppx_yo2ov_dt_b_product_details
Klipsch Cinema 1200 raiser holder legs... When standing on a shelf over a TV, to be aimed at a perfect angle to the listener, 4cm high. Pinted 3 pices with theese settings: 0.24mm layer, 3 walls, tops and bottoms 15% infill adoptive cubic…
