Phone Holder for Stroller / Tutis Viva
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spring-loaded phone holder for a stroller (Tutis Viva). To ensure a good fixation of the phone between Holder_1 and…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A spring-loaded phone holder for a stroller (Tutis Viva).
To ensure a good fixation of the phone between Holder_1 and Holder_2, there are TPU inserts (Holder_4_TPU), but it should also work without them if you don't have TPU filament.
For the clamping mechanism I used two 0.4x5x30mm springs, which you can order from Amazon.
I used the following parts for the assembly:
2x hexagon socket screw - M4x8mm
1x hexagon socket screw - M4x16mm
2x hexagon socket screw - M4x40mm
3x nut - M4
2x self-locking nut - M4
Happy printing!
Print Settings
Printer Brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Filament: Ankermake PLA+ Black
Category: DIY