1 / 4
Black and White Cat (Multicolor Print) / Katze in Schwarz Weiß Hueforge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a photo of my Cat, that i printed with my Bambulab P1S (AMS).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed it on my Bambulab P1S in about 2,5h with AMS.
It came out beautiful on my first try.
I used eSun PLA+ Filament in Black, White and Silver (Grey can be used too)
Layerheight 0,08mm (Extra Fine Profile Bambu Studio)
Base Layer 0,2mm
100% Infill
Start with Black, the Filament was swaped:
at layerheight 0,6mm in my case layer 6 (from Black to Silver/Grey)
at layerheight 1,0mm in my case layer 11 (from Silver/Grey to White