1 / 4
Black and White Cat (Multicolor Print) / Katze in Schwarz Weiß Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a photo of my Cat, that i printed with my Bambulab P1S (AMS).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 0
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
I printed it on my Bambulab P1S in about 2,5h with AMS.
It came out beautiful on my first try.
I used eSun PLA+ Filament in Black, White and Silver (Grey can be used too)
Layerheight 0,08mm (Extra Fine Profile Bambu Studio)
Base Layer 0,2mm
100% Infill
Start with Black, the Filament was swaped:
at layerheight 0,6mm in my case layer 6 (from Black to Silver/Grey)
at layerheight 1,0mm in my case layer 11 (from Silver/Grey to White