Tap-O-Mat - M3/M4/M5/M6 Thread Cutter/Tap to Drill-Bit Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple adapter for M3, M4, M5 and M6 tread cutting taps to a Hex drill bit.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple adapter for M3, M4, M5 and M6 tread cutting taps to a Hex drill bit. I created it because I only have a hand drill with an HEX-Insert and did not want to buy specialised taps.
I intended it to work on both sides (M3, M4 on one and M5, M6 on the other; the hex bit fits on both sides), but the one side works fine for all four types of thread taps.
When clamping the part there is a lot of flex, therefore I strongly recommend using a sturdy but flexible material like ABS or PETG.
Screws I used:
- 2x M5x16 with a Hex-head
- 2x M5 wing nuts
Optional but recommended to fix the clamps:
- 2x M3x8 countersunk