1 / 2
Tap-O-Mat - M3/M4/M5/M6 Thread Cutter/Tap to Drill-Bit Adapter — image 1
1 / 2

Tap-O-Mat - M3/M4/M5/M6 Thread Cutter/Tap to Drill-Bit Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a simple adapter for M3, M4, M5 and M6 tread cutting taps to a Hex drill bit.

Rating
0 / 5
Likes
11
Downloads
65
Makes
0
Views
1,325
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

This is a simple adapter for M3, M4, M5 and M6 tread cutting taps to a Hex drill bit. I created it because I only have a hand drill with an HEX-Insert and did not want to buy specialised taps.

I intended it to work on both sides (M3, M4 on one and M5, M6 on the other; the hex bit fits on both sides), but the one side works fine for all four types of thread taps.

When clamping the part there is a lot of flex, therefore I strongly recommend using a sturdy but flexible material like ABS or PETG.

Screws I used:

  • 2x M5x16 with a Hex-head
  • 2x M5 wing nuts

Optional but recommended to fix the clamps:

  • 2x M3x8 countersunk

Tags