1 / 3
Strong vase mode garbage bin / can
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stronger version of my vase mode garbage bin that features corrugations to make it wayyyyy stiffer
- Ocena
- 4,889 / 5
- Polubienia
- 65
- Pobrania
- 1058
- Wydruki
- 11
- Wyświetlenia
- 2662
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 11) (Komentarze: 11)Remiksy (0)Kolekcje (88)Powiązane
Thanks for choosing this model!
It is:
- Quite sturdy
- Designed to print using vase mode.
- A fast print (prints in under 2 ½ hours on a MK4).
- Remixable (with .step and .f3d files attached)
- Able to be used commercially / sold (see licence)
I printed it with 0.6mm extrusion width for external perimeters (using a 0.4mm nozzle).
To change extrusion width:
- Make sure you are in at least “advanced” mode; this is found in the upper right hand corner of PrusaSlicer.
- Go to print settings - advanced - extrusion width and change “External perimeters” to 0.6
Link to my old bin design:
https://www.printables.com/model/635726-vase-mode-garbage-bin
Happy printing!
-Note-
The original .gcode file was sliced with too high speed for the solid infill (I had to turn speed to 80% while printing the base). I plan to include a file that fixes that, but it will not be the exact same as the one i printed.
Tagi
canofficecontainerhouseholdfusion360freeworkshopvasemodewastebingarbagebinstlstephandysturdyfastprintopensourcecheapusefulbasketnosupportuseful3dprintsstronggarbagecanwastecontainernosupports3mfremixablecommercialf3ddurablestepfilegarbagebinmoderndesignwastebasketvasemodeprintingvasemodeprintgarbagecontainer