1 / 3
Strong vase mode garbage bin / can
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stronger version of my vase mode garbage bin that features corrugations to make it wayyyyy stiffer
- Rating
- 4.889 / 5
- Likes
- 65
- Downloads
- 1,058
- Makes
- 11
- Views
- 2,662
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Thanks for choosing this model!
It is:
- Quite sturdy
- Designed to print using vase mode.
- A fast print (prints in under 2 ½ hours on a MK4).
- Remixable (with .step and .f3d files attached)
- Able to be used commercially / sold (see licence)
I printed it with 0.6mm extrusion width for external perimeters (using a 0.4mm nozzle).
To change extrusion width:
- Make sure you are in at least “advanced” mode; this is found in the upper right hand corner of PrusaSlicer.
- Go to print settings - advanced - extrusion width and change “External perimeters” to 0.6
Link to my old bin design:
https://www.printables.com/model/635726-vase-mode-garbage-bin
Happy printing!
-Note-
The original .gcode file was sliced with too high speed for the solid infill (I had to turn speed to 80% while printing the base). I plan to include a file that fixes that, but it will not be the exact same as the one i printed.
Tags
canofficecontainerhouseholdfusion360freeworkshopvasemodewastebingarbagebinstlstephandysturdyfastprintopensourcecheapusefulbasketnosupportuseful3dprintsstronggarbagecanwastecontainernosupports3mfremixablecommercialf3ddurablestepfilegarbagebinmoderndesignwastebasketvasemodeprintingvasemodeprintgarbagecontainer