1 / 2
Holder for CANTON dolby surround satellite loudspeaker box — zdjęcie 1
1 / 2

Holder for CANTON dolby surround satellite loudspeaker box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for CANTON dolby surround satellite loudspeaker box

Ocena
0 / 5
Polubienia
4
Pobrania
34
Wydruki
0
Wyświetlenia
439
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This holder is made for CANTON satellite loudspeakers that are often included to dolby surround systems for home cinema entertainment systems.

I designed them for our party cellar which has a 19-20mm strong wooden wall shroud panelling. The mount can be hung over the top end of the wooden board and you can screw the original CANTON mount directly to this mount. 

Please have a look at the pictures for better understanding. The loudspeakers you see are placed onto the original CANTON mount which is screwed to this (adaptor)mount which is than hung over the top end of the wooden panel.

The big advantage is, that you do not need to drill any holes into your wall or ceiling panelling and the loudspeakers can easily be adjusted or removed as you like.

Available in TWO versions: Thin and thicker :-)

Material: PLA (PETG for bigger speakers)
Layerheight: 0.2mm
Infill: 20%

Tagi