Makita Trim Router carriage for Parkside guiderail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
That's my attemp to adapt a Makita Trim Router clone to a cheap Parkside guiderail. Easy print without supports.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 299
- Wydruki
- 2
- Wyświetlenia
- 2137
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter for Makita Trim Router (and clones) to a cheap Parkside guiderail.
I splitted the model into 2 parts for easier print without supports. Printed in ABS with a 0.4mm nozzle and 0.2mm layerheight.
What you need:
3x M3 heat inserts (Voron) → 3x4x5mm
3x M3 8mm countersunk head screws
Should work as well with the Parkside Performance 20V Router PMFAP 20-Li A1 and every Makita clone.
Update 2023-12-03:
Added a 1mm shim to compensate the black plastic on the guiderail. Use this part optional or washers if needed.
Update 2024-06-15:
Added f3d file for customizing the model.