Biqu H2 Mount for Elegoo Neptune 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount an H2 hotend to your Neptune 3
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
4-7-24: Update: Added A 1mm shorter version of v2 with micro probe called “V3”. I changed the nozzle to E3D brand which is a bit shorter than original Biqu Nozzle. This caused the probe to hit the plate while stowed before the nozzle.
12-17-23 Update: Added a mount for the Biqu Microprobe. This mount fits around the Stock H2 Part cooler fan duct from Biqu and the EBB42 canbus mount by Sout13: https://www.printables.com/model/273953-biqu-h2-ebb42-adapter
Simple adapter to mount a Biqu H2 hotend on an Elegoo Neptune 3. I believe this will work with all H2 hotends. This might work on other Neptune printers but not 100% sure.
Have not tested with POM wheels because I've upgraded to a linear rail on the x axis. If someone tests this with wheels let me know how it goes.
Need M3 screws:
2x 16mm
1x 14mm (ideally). I used 16mm with several washers.
3x 10mm
2x M3 Nuts
Print on side to make an L on the X-Y plane. No supports required. Made with ASA.