Shelly Plus H&T - Wall Mount - Centered
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelly Plus H&T Humidity & Temperature smart sensor mount using only one screw and centered.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 301
- Wydruki
- 4
- Wyświetlenia
- 1244
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Shelly Plus H&T Humidity & Temperature smart sensor mount using only one screw and centered. Sensor has mounting holes on the back but these are by design off center. This mount resolves that.
Print with PLA, PETG or any material you like. No supports are needed. Screw hole is 4 mm diameter, mount plate is 4 mm thick.
There are 2 versions:
Shelly-Plus-HT-WallMount-Centered - With mount hole in the center.
Shelly-Plus-HT-WallMount-Centered v2 - With mount hole higher off center to improve stability when mounted.
Let me know which one you like better.