1 / 6
TUFS (Totally Unnecessary Flipping Scraper) - Print in Place - No Supports — zdjęcie 1
1 / 6

TUFS (Totally Unnecessary Flipping Scraper) - Print in Place - No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A full size ice scraper that folds into itself for storage. Open it with a quick flick of the wrist! Print in Place!

Ocena
0 / 5
Polubienia
8
Pobrania
33
Wydruki
0
Wyświetlenia
520
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I decided I wanted an ice scraper that folded nicely on itself so it can be long enough to reach the middle of the front.  I also wanted it to be fun!



The scraper flicks open with a satisfying flick and locks in place with the button. 

Printing Instructions

Make sure your printer is relatively well tuned, tolerances are 0.2mm which should cover most reasonable printer setups.  The button is tallest so you can change the color of the button with a filament change if you want.

Layer Height: 0.2mm should be fine.

Print in Place

No Supports

Print Time: 12 hours 

 

Tagi