TUFS (Totally Unnecessary Flipping Scraper) - Print in Place - No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A full size ice scraper that folds into itself for storage. Open it with a quick flick of the wrist! Print in Place!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 520
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I decided I wanted an ice scraper that folded nicely on itself so it can be long enough to reach the middle of the front. I also wanted it to be fun!

The scraper flicks open with a satisfying flick and locks in place with the button.
Printing Instructions
Make sure your printer is relatively well tuned, tolerances are 0.2mm which should cover most reasonable printer setups. The button is tallest so you can change the color of the button with a filament change if you want.
Layer Height: 0.2mm should be fine.
Print in Place
No Supports
Print Time: 12 hours
