1 / 2
Nozzle Holder 0.6, 0.4, 0.25 for Prusa Mini Y-Axis Top
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remixed version of phi's Nozzle Holder and fits on top of the y Axis using the screw holes.
- Ocena
- 4,667 / 5
- Polubienia
- 21
- Pobrania
- 97
- Wydruki
- 2
- Wyświetlenia
- 777
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (2)Kolekcje (42)Powiązane
This is a remixed version of https://www.prusaprinters.org/prints/42178-nozzle-holder-cap for the Prusa Mini. The Nozzle Holder fits on top of the y Axis using the screw holes.
Print with 6 Top Layers, 15% Infill, 0,2mm layer height, Color-Change at 12.20/77 and supports for overhangs and bridges. I printed with PTEG, because the part mounts close to the axis motor, which can get quite hot.