1 / 4
Prusa Mini Style Y-Axis Idler for Prusa MK3s/+ — zdjęcie 1
1 / 4

Prusa Mini Style Y-Axis Idler for Prusa MK3s/+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remeshed Y-Axis Belt Idler to tension the Y-belt without flipping the printer.

Ocena
5 / 5
Polubienia
50
Pobrania
227
Wydruki
5
Wyświetlenia
2001
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is the remeshed Prusa Mini Style y-axis belt idler for Prusa MK3s/+. This would allowed you to adjust the Y-Belt tension without flipping the printers and without hassle. 

The only thing you have to change is the screw for LCD mounting, from M3x10 to at least M3x12. The rest will be remained the same as existing.

This remeshed idler had been tested for few months. 100% working well.

Take note of that if you required to replace the Y-belt holder, you can print one from Prusa Bear.

Tagi