1 / 15
3d upfitters 60mm fan adapter for the grommet holes — zdjęcie 1
1 / 15

3d upfitters 60mm fan adapter for the grommet holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3d upfitters 60mm fan adapter for the grommet holes

Ocena
0 / 5
Polubienia
6
Pobrania
56
Wydruki
0
Wyświetlenia
523
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I am using the nice enclosure provided by 3d upfitters and I wanted to improve a little bit the air management system (fancy name for number of fan) of the enclosure.

To do so I need to find a way to add a second fan but the only way to do it was to use the grommet holes available on the back/top of the enclosure.

So, I made up an adapter for a 60mm fan to the 49.5mm diameter hole. It is simply a screw/nut solution.

The nut has a grid for safety purpose. I also add a grid for the fan itself. We never know.
As per mounting instruction you should first mount the fan to the adapter and then screw the whole assembly with the nut to the enclosure wall.

Resolution:

0.2

Infill: 

15%


Filament:

ANY PLA or PET 

 

 

 

 

Category: 3D Printer Accessories

Tagi