1 / 8
92mm Fan to 60mm Adapter for 3d upfitters enclosure — zdjęcie 1
1 / 8

92mm Fan to 60mm Adapter for 3d upfitters enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

92mm to 60mm Fan Adapter for 3d upfitters enclosure

Ocena
5 / 5
Polubienia
25
Pobrania
283
Wydruki
1
Wyświetlenia
1408
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I am using the nice enclosure provided by 3d upfitters and I wanted to improve a little bit the air management system (Change the fan size) of the enclosure.

The enclosure is provided either with an 80mm fan or 60mm depending on if you use the filter or not.

Well, I needed to use an old 92mm fan, so I simply did a “me-too“ of the 80mm adapter part compatible with my 92mm fan.

Also made a fan grid for safety reason.

 

Resolution:

0.2

Infill: 

15%


Filament:

Any PLA or PET 

 

Tagi