Creality K1 - Light Lid Riser slotted (JC-Creality K1 Lid Riser mod)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I redesigned the corner components and optimized them. The weight saving is approx. 45% and less warping with ABS.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 2096
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was looking for an increased printer cover for my K1 and decided on the slotted version from Joe Cooper. After printing the parts with ABS, I noticed a lot of warping on the contact surface of the parts. As a result, the outer edges were slightly raised after screwing and a gap formed between the cover and the betweener. I then redesigned the corner components with the outer dimensions and optimized them slightly. The weight saving is approx. 45% with the same functionality.
Printing with ABS went smoothly without cooling during printing and with slow cooling afterwards. The contact surfaces were now almost flat.
I printed the parts with eSUN ABS.
Nozzle: 0.4 mm
Layer height: 0.25
Wall lines: 3
Top/Bottom layers: 3
Infill: 15%
Brim: yes
Joe's betweener still fit and can still be used.
My thanks go to Joe Cooper for the great idea and template.