1 / 8
Cowl for Parkzone P-51 Mustang (Gunfighter) — zdjęcie 1
1 / 8

Cowl for Parkzone P-51 Mustang (Gunfighter)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement Cowl for Parkzone P-51 Gunfighter

Ocena
0 / 5
Polubienia
3
Pobrania
252
Wydruki
0
Wyświetlenia
1106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This cowl is meant to be a replacement one for Parkzone's P-51 Gunfighter.

Things to tinker with:

wall thickness There are three files, one with a wall thickness of 0.8mm, another one with 0.4mm and one solid one for you to experiment with different wall thicknesses yourself!

 

Results:

Vase Mode (Cura: spiralized outer contour): The part takes about 1 hour to print and ends up being pretty sturdy (as it is flexible) and very light, coming in at ~11 gr.

Settings (Hobbyking PLA):

  • Hotend: 220C
  • Hotbed: 70C
  • Flow: 102%
  • Speed: 60mm/s (initial layer: 30mm/s) *Fan speed: 0% (resolution suffers a bit but you almost can't delaminate the layers by hand)**

Print Settings

 

Printer:

Anet A8

Resolution, Mode: 

0.2, vase mode
 

Notes: 

Print this part with the front face downwards so you don't need any supports.

Tagi