Epoxy Mixer Tray and Spatula
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you want to mix up some 2-part epoxy, there are never handy things to mix it up in. Well, problem solved.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
When you want to mix up some 2-part epoxy, there are never handy things to mix it up in. Well, problem solved. Not only that, but it comes with a little spatula that's flat at one end and pointy at the other.
You can re-use these a few times, and if using PLA and "organic" epoxy, you can even burn it up at the end of its life with a relatively clear conscience.
Disclaimer: I sell PLA bioplastic filament at Diamond Age Solutions and am having an ethical dilemma over whether I should optimise this design...
Instructions
Print this one with a pretty close weave, or epoxy comes out the bottom!
If you need a bigger tray, diddle with the SCAD file.