Epoxy Mixer Tray and Spatula
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When you want to mix up some 2-part epoxy, there are never handy things to mix it up in. Well, problem solved.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v2.0
When you want to mix up some 2-part epoxy, there are never handy things to mix it up in. Well, problem solved. Not only that, but it comes with a little spatula that's flat at one end and pointy at the other.
You can re-use these a few times, and if using PLA and "organic" epoxy, you can even burn it up at the end of its life with a relatively clear conscience.
Disclaimer: I sell PLA bioplastic filament at Diamond Age Solutions and am having an ethical dilemma over whether I should optimise this design...
Instructions
Print this one with a pretty close weave, or epoxy comes out the bottom!
If you need a bigger tray, diddle with the SCAD file.